Robert McKeown Co., Inc.

Thomas Verified

CHO-FOIL EMI Shielding Tape with Conductive Adhesive (Copper, Aluminum or Tinned Copper)Chomerics’ CHO-FOIL tapes are an economical EMI shielding solution for a variety of commercial uses. The tapes are available in copper, aluminum, or tinned copper foil backed More... with Chomerics’ highly conductive pressure-sensitive adhesive (Recognized Under the Component Program of Underwriters Laboratories, Inc.). CHO-FOIL copper tape is available with a non-conductive adhesive for applications requiring surface conductivity only. An embossed version of CHO-FOIL copper tape is also available, for a more attractive appearance up to 6 inches (152 mm) wide. Standard length rolls and die-cut custom shapes can be ordered.CHO-FAB EMI Shielding Fabric Tape with Conductive AdhesiveCHO-FAB tape is a corrosion resistant nickel-plated cloth coated with Chomerics’ highly conductive pressure-sensitive adhesive (Recognized Under the Component Program of Underwriters Laboratories, Inc.). CHO-FAB tape is extremely strong and lightweight, and has excellent conformability/wrapability to enhance shielding performance and appearance. Use of corrosion resistant nickelplated cloth and Chomerics’ superior metal-particle-filled conductive adhesive technology produces a tape used in a wide variety of EMI shielding and grounding applications. Less

Strip-N-Stick® tape provides all the benefits of silcone rubber in an easy-to-apply, pressure-sensitive adhesive tape form. Compressible and flexible, it can conform to irregular surfaces, wrap over cylinders or be formed to produce right angles. Applications include More... gasketing, vibration damping, and thermal insulation.The tape reduces the need for expensive diecut- parts – you don‘t pay for the center. It also eliminates the high cost of bonding and will be slit to order from 1/2" and up.100S is a silicone sponge with high temperature silicone adhesive.200A is a silicone sponge with aggressive acrylic adhesive.300AR is reinforced silicone sponge with aggressive acrylic adhesive. Its unique construction provides compressibility of sponge and dimensional stability of fiberglass reinforcement. Stretch is eliminated, which contributes to the consistent size and shape of cut parts and inhibits outward extrusion under high pressure. It further permits close tolerance slitting.440S is a 1/32" thick Shore A 30 durometer silicone solid with high-temperature silicone adhesive.440A combines 30 durometer solid rubber with a high-adhesion acrylic adhesive for an excellent 1/32" thick gasket material. It provides high elongation and good comformability.512AF uses SGPPL CHR’s silicone foam along with film-supported acrylic pressure-sensitive adhesive.Adhesive temperature range for Silicone PSA is –100 °F to +500 °F and for Acrylic PSA, –20 °F to +300 °F. Less

THERMATTACH® T418Extremely High Strength Heat Sink & Component Attachment TapeT418 is the latest offering in Chomerics’ line of industry-leading thermally conductive attachment tapes. Chomerics has utilized its world-class materials science expertise and More... decades of applications development experience to create this superior product, offering exceptional thermal and mechanical attachment properties.THERMATTACH® T410 and T410-R ( T410-R is a RoHS compliant version of T410 with no visual or functional difference) tape consists of a high bond strength, pressure sensitive acrylic adhesive loaded with aluminum oxide and coated onto a 0.002 inch (0.05 mm) aluminum foil carrier. The other side of the foil carrier has a silicone pressure sensitive adhesive which provides excellent adhesion to silicone-contaminated plastics and other low energy surfaces.THERMATTACH® T411 tape consists of a high bond strength pressure-sensitive adhesive with an expanded aluminum mesh carrier layer. The mesh carrier allows the tape to conform to curved surfaces of plastic molded IC packages, continued providing a high adhesive strength attachment for heat sinks. The high per-formance silicone PSA allows adhesion to silicone-contaminated plastics and other low energy surfaces.THERMATTACH® T413 ionically clean tapes feature a fiberglass carrier - T414 ionically clean tapes feature an electrically insulating film carrier. Both T413 and T414 double-sided adhesive tapes provide an effective thermal interface between components, ceramic hybrid circuits, printed circuit boards, flexible circuits, heat spreaders and heat sinks. Ionically clean, they provide good thermal conductivity and exceptional bonding properties - eliminating the need for thermal grease and mechanical fasteners. These tapes are embossed with a unique pattern for maximum conformability and minimal air pockets. Less

Woven glass cloth tapes with pressure-sensitive adhesives electrically insulate and provide mechanical protection at high temperatures.Available in custom widths from 1/8 in to 24 in, and come standard on a 60 yd roll (3 inch core).

3M™ Cotton Cloth Tape is a white cotton cloth backing with a rubber thermosetting, pressure-sensitive adhesive. It is abrasion resistant, and offers good mechanical strength.3M™ Cotton Cloth Electrical Tape 65 is a 9.7 mil, white cotton cloth backing with More... a rubber thermosetting, pressure-sensitive adhesive. UL Recognized for use at temperatures not exceeding 105 °C. Less

This .0055 inch thick tape is a polyester web reinforced polyester film coated with a rubber pressure-sensitive adhesive. Also, this puncture-resistant tape is tough and conformable with excellent electrical properties.3M™ Composite Film Electrical Tape 44 is More... best used for insulating, anchoring and banding in motors and transformers. Available in custom widths from 1/8 in to 24 in, and comes standard on a 90 yd roll on a 3 inch diameter core. Less

CHR® SGK5-05 is manufactured from extra strength, para-aramid (phenyleneterephthalamide) fiber cloth impregnated with a dispersion of anti-static PTFE (polytetrafluoroethylene) coated with a high temperature silicone pressure-sensitive adhesive. The anti-static More... version of this product is black, providing protection from UV damage, to which para-aramid fiber cloth is susceptible. Resistivity of this version is less than 106 ohms/square.SGK5-05 is specifically designed to resist abrasion and provid added strength in high-temperature wrapping applications where standard fiberglass cloth does not provide adequate chemical resistance and/or low friction release. Less

Nitto Denko’s foil products are engineered to provide the highest EMI/RFI shielding effectiveness available in a pressure sensitive tape. Our interlined products permit ease of die cutting and are highly conformable for convenient application.