CS Hyde Company

Thomas Verified

3M™ Adhesive Transfer Tapes are rolls of pressure-sensitive adhesive pre-applied to a special release liner. For application, the tape is simply pressed, adhesive side down, to a surface and the liner is peeled off. CS Hyde laminates 3M™ adhesives to a variety More... of polymer plastics, to produce specialty film tapes. Laminating transfer adhesive to plastics creates a peel and stick bonding or fastening solution no matter the application. We stock a variety of adhesive types including acrylic, silicone and modified acrylic transfer adhesives as well as specialty adhesives like conductive XYZ adhesive. Utilizing our on-site converting machinery, we can produce custom products to the dimensions of your application.CHECK Availability:  orders@cshyde.com Less

UHMW Polyethylene Tape: Pressure sensitive UHMW with High Stick Acrylic Adhesive. - High shear strength - High Temperature resistance - Excellent Solvent resistance - Excellent UV resistanceIdeal for long term/permanent adhesion, high temperature, and exposure More... to extreme conditions.   UHMW PE provides a nonstick, low-friction surface similar to PTFE tape but with much higher abrasion and puncture resistance. Ideal for chutes, packaging lines, slides, and anywhere high-pressure sliding contact occurs. Also great for sound dampening—eliminates squeaks and rattles caused by adjacent parts movement. Tape has a film made of UHMW (ultra-high molecular weight) polyethylene and has .002" of acrylic adhesive. Color is translucent. Temperature range is -40° to +180°F. UHMW Film is FDA compliant for Food Contact.Custom widths available; Substrate Thickness from .003" to .125" thick. Many sizes, shapes, rolled goods, custom cut parts. Minimums ONE each. E-mail, chat, or phone. When quantity required exceeds $1000.00. call for discounts. Less

Polyester (PET) Tape with silicone adhesive is used in high temperature masking. Commonly used in Powder Coating, Spray coating, Plating, Electroplating, Anodizing, and high temperature splicing. Removes cleanly after use. Recommended application temperature to achieve More... best result is 65F (18C) or above. Proper bonding may not occur unless adhesive and surface material are both at 65F (18C) or above.Kapton® (Polyimide) Tape (-100F to +500F) is used when temperatures are higher than the temperature range of Polyester.*Request a sample in order to make correct color match. Less

Skived PTFE Tape is made with Teflon™ fluoroplastic and a pressure sensitive silicone adhesive on one side. Skived PTFE tape is highly conformable with 300% elongation. CS Hyde’s PTFE tape features superior insulating strength, is non-stick, flexible, high More... temperature, as well as chemical, heat & moisture resistantance. Other properties include no porosity, excellent release, and of course it has a super-low coefficient of friction. Also used as an insulating and masking tape. Our PTFE tape is available in 5 or 36 yard rolls.Custom width rolls, die-cut parts, or sheeting is our specialty. Less

The 21- Series is a Standard Grade PTFE (Teflon®) coated fiberglass tape with SILICONE pressure sensitive adhesive on one side, available with or without liner.  This tape is an excellent product for the various industrial applications requiring release properties More... and extreme temperatures (up to 500ºF), chemical or environmental resistance. Performance & Application:  Our Standard Grade PTFE (Teflon®) tapes demonstrate superior dielectric strength and resistance to wear, tear, cut through, breaking and flow under heat and pressure.  PTFE (Teflon®) is non-tracking in an electric discharge and will not support combustion.  Dielectric strength changes little over a wide range of frequencies and relative humilities.  PTFE resin is one of the most chemically inert materials available and has a low coefficient of friction.  Few substances will stick to its surface.  These tapes are used in heating sealing and element covers, lamination release covers, backing release surfaces for impulse wire sealing, L-Bar sealing, shrink wrapping, blister packing, plastic bag manufacturing, dry can roll covers, chute-bed-bin-oven liners, commutator covers, spacers, slot liners, splicing, field and armature winding, cable and conductor wrapping, tool & mold release, flash breaker tape, harness wrap.*Custom widths available Less

Standard Grade PTFE Coated Fiberglass Tape has a pressure sensitive Acrylic adhesive on one side. Mid-range pricing with excellent properties: Release, High Slip, Heat, Chemical, Moisture & Tear Resistant. Acrylic Adhesive -40F to 375 F / Natural Brown ColorCustom More... widths available; e-mail, chat, or phone Less

Rulon® Tape is manufactured from skived compounded PTFE Rulon® film material. The RU-Series is often referred to as bearing tape becuase its film surface is self-lubricating and its backing is conformable. Rulon combines a low coefficient More... of friction with high temperature stability.  It also offers outstanding abrasion resistance, which equates to a 500-fold increase in wear resistance over PTFE in rotating bearing tests.  The Rulon backing is chemically inert and offers excellent high temperature resistance. This tape construction is stable, non-toxic and weather resistant.  Both Rulon® tapes have an 8.0 mil. substrate thickness and 2.0 mil. of pressure sensitive adhesive for the silicone system and 2.3 mil. of pressure sensitive adhesive for the acrylic system. Less

Ultra Premium Grade PTFE Coated Fiberglass has a High Temperature Silicone Adhesive -100F to +500F. Designed for demanding applications. Chemical, Heat, Moisture & Tear resistant. Fiberglass provides superior dimensional stability; PTFE coating provides slippery, More... anti-friction release surface. Ultra Premium Grade has super smooth, glass-like surface. Provides excellent, consistent heat seal in packaging applications. "Chocolate" Natural Brown ColorFDA Approved PTFE Tape: Fiberglass Fabric meets: FDA 21CFR177.1550 Silicone Adhesive meets: FDA 21CFR175.105Fiberglass provides superior dimensional stability; PTFE coating provides slippery, anti-friction release surface. Ultra Premium Grade has super smooth, glass-like surface. Provides excellent, consistent heat seal in packaging applications. "Chocolate" Natural Brown ColorCustom widths available; e-mail, chat, or phone <BR Less

Ultra Premium Grade PTFE Coated Fiberglass pressure sensitive Acrylic Adhesive. Designed for demanding applications. Chemical, Heat, Moisture & Tear resistant. Fiberglass provides superior dimensional stability; PTFE coating provides slippery, anti-friction release More... surface. Ultra Premium Grade has super smooth, glass-like surface. Provides excellent, consistent heat seal in packaging applications. / -40 to 350 F / Natural Brown ColorCustom widths available; e-mail, chat, or phone <BR Less

CS Hyde’s skived high density tape is made up of PTFE backed with high temperature silicone adhesive. High Density PTFE tapes have less elongation and greater tensile strength than traditional skived PTFE Tape. High density PTFE Tape exhibits More... outstanding dielectric, chemical, temperature, wear, anti-stick and non-toxic properties. This PTFE tape can be used a disposable release surface or as a high temperature wrapping tape to protect wire looms or harnesses. 15-HD PTFE rolls available in 5 or 36 yard lengths.Custom widths, die-cut parts, and options with peel off liner available. Less

UHMW Polyethylene Tape: Pressure sensitive UHMW with Aggressive Rubber Adhesive:- High Initial Adhesion (Very Aggressive)- Good shear strength - moderate temp range: 120°F to + 175°FIf this tape will be applied in an indoor application that is not More... exposed to a lot of moisture. UHMW with rubber adhesive is a more cost effective solution, compared to acrylic or high bond UHMW adhesive versions.  UHMW PE provides a nonstick, low-friction surface similar to PTFE tape but with much higher abrasion and puncture resistance.Ideal for chutes, packaging lines, slides, and anywhere high-pressure sliding contact occurs. Also great for sound dampening—eliminates squeaks and rattles caused by adjacent part movements. Tape has a film made of UHMW (ultra-high molecular weight) polyethylene and has .005" of rubber adhesive. Color is translucent. Temperature range is -40° to +150° F. UHMW film is FDA compliant for Food Contact.Custom widths available; Thickness avail from .003" to .125"; Custom Cut UHMW available in squares, rolls, continuous footage, die-cut parts put up like labels on a roll with a peel-off liner. E-mail, chat, or phone. Customers with orders over $1000. should contact us for additional discounts. Less

Nylon 6/6 Strips with Adhesive backing. Eliminates cost, time and work of mechanical fastening. Ease of assembly. Strips sold in widths of 4”, 6”, 12” in continuous footage up to 20 ft. Thickness: .031”, .060”, .125”. White or black. More... Available with permanent 3M VHB® adhesives. Custom shapes offered (washers, discs, squares.)These Nylon 6/6 strips possess an outstanding balance of properties—combining strength, moderate stiffness, high service temperature and a high level of toughness. They are particularly resistant to repeated impact, have low coefficients of friction and excellent resistance to abrasion. They resist fuels, lubricants and most chemicals, but are attacked by phenols, strong acids and oxidizing agents. Less

Black Anti-Static UHMW Tape with Acrylic or Rubber Adhesive. Low co-efficient of friction. Ideal for applications that require abrasion & wear resistance, low friction, high slip & electrical conductivity for static dissipation. Black UHMW PE More... Tape is the perfect defense for areas where dust and electrical charge could cause problems. Backed with adhesive allows for ease of application (no drilling, screws, extra labor). Adhesive Temperature range: up to 300F for acryic adhesive and 150F for rubber adhesive. UHMW Tapes can be die cut into label-like peel off parts per your specifications.Applications include: Assembly converyor components, slide liners, trough liners, transfer plates, robotic parts, guide rails, chain guides, table surfaces, and many more.   Contact us for Anti-Static UHMW- with 3M™ Super Conductive 3M9712 Acrylic Adhesive.On Site Converting Available: Custom width rolls, Sheets, Strips, or Die Cut Parts. Less

Exclusively from CS Hyde comes PVDFstick®, PVDF film laminated with a strong acrylic adhesive for ease of application, positioning, and fastening. PVDFStick® offers excellent chemical and corrosion resistance, and features a high tensile strength (7,550psi@yield). More... It also has good thermal stability and can be used in sustained applications up to 300°F. PVDF is extremely pure, which makes it a good candidate for food applications. When specified, PVDF resin complies with FDA regulation 21 CFR 177.510, USDA, 3A sanitary standards and meets ASTM D3222 resin specifications. PVDF can be used as a substitute for Tedlar®, ask for info. Another feature of PVDFStick® Tape is its high impact resistance and durability. Compared to many thermoplastics, PVDF has excellent resistance to creep and fatigue, yet in thin sections such as films, PVDF components are flexible and transparent. PVDF film is stable to UV light and the effects of weather. In cold, heat, sunlight and humidity PVDF Film does not wear out or get brittle. PVDF has low NBS smoke generation and superior LOI. Less

With the ease of positioning and fastening in mind, CS Hyde Company laminates adhesive to Delrin® sheet.Delrin® materials are based on formaldehyde polymerization, are highly crystalline, strong, rigid, and possess good moisture, temperature, and solvent resistance. More... Because Delrin® absorbs far less moisture than type 6 and type 6/6 nylons, it is widely used for many mechanical and industrial applications requiring closer tolerances and greater dimensional stability. Delrin® Sheet has a 3M acrylic pressure sensitive adhesive with a Peel-Off Liner. For more specific adhesive properties, please request the adhesive data sheet. Less

PEEK™ Tape with silicone or acrylic adhesive PEEK™ Tape is composed of two high performance materials: high temperature, chemical resistant, abrasion and wear resistant PEEK™ Film (002" to .010" thick) and 3M™ specialty adhesives (nominal More... adhesive thickness of .0015 to .002") in silicone adhesive (rated up to 500°F), acrylic adhesive (High tack-High Bond) or 5 mil. conductive filled acrylic adhesive (ideal for EMI/RFI shielding applications). Utilizing our in-house lamination services, we can produce PEEK Tape with a specialty adhesive fastening system to meet the requirements of your application and utilize PEEK polymer performance properties.  When compared to Teflon™ PTFE tapes, PEEK tape exhibits a much higher tensile strength (18.9 kpsi / 130 MPa), making it a tougher, stronger material with better wear performance, and a lower density. When compared to Kapton® Polyimide tape, PEEK tape has lower moisture absorption (.04%/24 hr.), a higher tear strength (35g/mil.), making it a better performance option for barrier protection applications in hot/humid environments. The acrylic adhesive (37-A Series) laminated to PEEK™ film also distributes humidity, UV, and water resistance if applied correctly.PEEK film can meet a variety of aerospace, automotive, food/water (FDA 21 CFR 177.2415), medical/pharmaceutical, and military/nuclear approvals, and standards.37-A PEEK™ Tape (Acrylic Adhesive):Excellent bond to low surface energy plastics such as, polypropylene and powder coatings.Excellent adhesion to lightly oiled surfaces typical of machine parts.Temperature Resistance:usable for short periods (minutes, hours) at temperatures up to 300°F (148°C)             intermittent longer periods of time (days, weeks) up to 200°F (93°C). 37-A-9712 PEEK™ Tape (Conductive Filled Acrylic Adhesive):Performance acrylic electrical adhesive loaded with conductive fibersIdeal for attaching EMI shields to electronic and electrical devices.Compared to mechanical fastening like screws or bolts, 3M® 9712 adhesive provides reduced assembly time and a solid bond line with no gaps which might result in EMI Emission.Temperature resistance:Short Term Exposure (minutes hours): 250°F (121°C)Long Term Exposure (days, weeks): 158°F (70°C)37-S PEEK™ Tape (Silicone Adhesive):Silicone Adhesive provide high bond strength to most silicones and difficult-to-bond to substrates like stainless steel or silicone, including many low surface energy plastics ex. Polycarbonate.Superior Temperature PerformanceRecommended for applications that require tape to be removable.Maximum Temperature Resistance: up to 500°F (260°C) Less

CS Hyde Company has custom laminating capabilities to put adhesive on Ultem® (PEI) films that normally do not have adhesive. Ultem® Tape is available in substate thickness of .003", .005", .010". All have 3M Acrylic Adhesive. Ultem® Tape can also be die-cut More... into custom shapes.ULTEM® Substrate Film: Inherent Flame Resistance & UV Stability,Temperature up to 338F, VTM-0 UL94, Low dissipation factor, FDA Compliant, Ultem® offers high heat resistance coupled with high strength, stiffness, UV stability and broad chemical resistance. Combo of outstanding thermal, mechanical electrical properties together with exceptional flame resistance & thermoformability. Unprecedented performance-wide variety of demanding new design concepts.Contact us for discounts on larger quantities. Less

Kevlar® / Aramid and glass fibers combine to produce this lightweight, high-strength, abrasion-resistant material. Has Pressure Sensitive Adhesive. Very flexible with little stretching.Kevlar® / Aramid Tape can be draped with minimal elongation. High tear strength More... & excellent dimensional stability. Good chemical & mildew resistance.Unaffected by most acid and alkali solutions. Color =Light yellow. Self extinguishing, non-melting.Strips- Woven tapes in narrow widths are ideal for wrapping water & steam piping, protecting hydraulic lines and as lagging & electrical insulation. Make gaskets, pipe wrap & insulating cable. For exceptionally tough mechanical applications. Excellent for use in high moisture & high flex applications.PSA Kevlar® / Aramid Tapes - Aramid blend in a woven tape form with Pressure Sensitive Adhesive.MINUMUMS MAY APPLY. Less

Product Description: V2800 series polyurethane foam tapes combine a black polyurethane foam substrate with a high-performance, pressure-sensitive acrylic adhesive on both sides. The polyurethane foam substrate allows energy and stress in the joint to be dissipated More... over the entire bond. This product is an ideal choice for severe exterior bonding applications, it is durable in all weather conditions and provides resistance against UV light, extreme temperatures, fungi, oxidation and ozone. The V2800 series is specially designed to provide the following features: • Stress distribution reduces pressure points, thereby minimizing distortion • High-performance, durable acrylic adhesive provides a strong, long-lasting bond • Conformable, closed-cell polyurethane foam has excellent environmental resistance • Prevents corrosion of dissimilar materials by eliminating the contact between them.Common Applications: Window decoration bars • Emblems and ornamentation • Trailer roof bows • Panel stiffeners • Signs and nameplates • Weather stripping • Body side molding • Composite panels Less

Skived PTFE tape is made with Pure Non-reinforced PTFE with pressure sensitive acrylic adhesive on one side. Skived PTFE tape is highly conformable with 300% elongation. Superior insulating strength. Non-Stick. Flexible, High Temperature, Chemical, Heat & Moisture More... Resistant. Non-porous. Excellent Release, Anti-Friction, Insulating & Masking Tape. Available in 5 yd or 36 yard roll.Custom widths, die-cutting, sheeting available; Less

UHMW High Bond (HB) Tape has all the benefits of strong, slippery, abrasion-resistant UHMW (ultra-high molecular weight) polyethylene tape, plus a super-high bond adhesive.  Low friction UHMW High Bond tape is an excellent choice for applications which require More... adhesion to difficult-to-bond, Low Surface Energy surfaces like some plastics, powder-coats, foams, and oily metals. UHMW-HB even sticks to high slip surfaces like Teflon®, Acrylic, PE, etc. UHMW Film is FDA compliant for Food Contact.UHMW High Bond Tape is available in many film thicknesses: .010", .020", .030", .060". Adhesive is .002" thick. This material is a natural, opaque white color.UHMW High Bond tape is also available in a Black Semi-Conductive, Anti-Static version with the same high bond adhesive. Please contact sales@cshyde.com for a quote.Custom widths, thicknesses and lengths are also available. CS Hyde Company can custom die-cut UHMW HB into strips, labels, discs, washers, squares, etc. Send us your drawing today! Less

CS Hyde Company has an extensive line of thermal spray and plasma flame spray tapes available. High temperature resistance (up to 550F) makes them ideal for plasma flame spray masking applications. Various Colors. Cut to width. Types include silicone coated fiberglass, More... foil coated fiberglass, double and triple-ply silicone & fiberglass tapes, and double sided fiberglass tape. Less

High strength 3M™ VHB™ tapes are used in many industries to replace mechanical fastening for permanent assembly in a variety of applications. This ideal tape fastener can be used on interior and exterior bonding applications. 3M™ VHB Tape is a More... great alternative fastener to replace rivets, spot welds, liquid adhesives, and other permanent fasteners. 3M™ 4941- Multi-purpose acrylic adhesive on both sides of conformable foam.Multi-Purpose Acrylic- Ideal for medium surface energy substrates like metals, glass, some plastic polymers, as well as plasticized vinyl. The unique conformable foam provides excellent adhesion.3M™ 4905- Clear adhesive ideal for applications where clear or colorless adhesive is required.General Purpose Acrylic: This adhesive bonds to most higher surface energy substrates including metal, glass and high surface energy plastics.   Less

Strip n' Stick® Silicone Tape is made of Silicone Sponge, Foam, or Solid Silicone rubber with pressure sensitive adhesive for easy application. Compressible & flexible. Conforms to irregular surfaces, wrap over cylinders or be formed to produce right More... angles. Reduces costs of expensive die cut parts or bonding. Call [800-461-4161] or Email [sales@cshyde.com] for details Less

Vinyl Tape is resistant to moisture and humidity, and is abrasion-resistant. Because of these characteristics, vinyl PVC Tape has many uses, such as: floor, lane & aisle marking, color coding, identification for safety, and wrapping/insulating air ducts & underground More... pipes. This tape is highly conformable and has good elongation, while the adhesive is non-corrosive. Available in: Blue, White, Yellow, Black, Red, Green, Orange, and Gray. Applicable Specs: A-A-1689B, Type I, Class 2; PPP-T-66 E, Type I Meets OSHA Color Coding Requirements.Color Coding System: Brown= Oil; Green= Water; Gray= Steam; Blue= Air; Orange= Electrical; Red= Fire/Flammable; Purple= Acids/Radiation; Yellow= Gases; Black or White= General Purpose-Resistant to acid, alkaloids, oils, moisture, humidity & corrosion. Less

Hi-Stick double sided adhesive transfer tape offers a secure bonding result under high temperature conditions as well as good resistance to solvents, chemicals, UV and heat. It also possesses excellent bonding characteristics to low-energy surfaces and substrates. More... Hi-Stick tape has excellent plasticizer migration resistance. Its temperature range is -22F to 356F (-30C to 180C), and is available in 8 mil thickness. Less

This tape is a woven fiberglass fabric with pressure sensitive adhesive system on two sides. Use for high temperature masking tape during flame spray applications. Also an effective electrical cable wrap. Silicone adhesive has temperature range of -100F to +500F.

High Temperature Fiberglass tape or most known as Glass Cloth Tape, is a non-coated woven fiberglass fabric with a pressure sensitive silicone adhesive system on one or two sides.  Glass cloth tapes are most used as high temperature masking tapes More... for flame spray applications or as high temperature electrical cable wraps. All fiberglass cloth tapes utilize silicone adhesive due to its temperature range of -100°F to +500°F.Types of glass cloth tapes:29468- Double Sided Fiberglass Tape: Double Sided Fiberglass Tape with High Temperature Silicone Adhesive on both sides. Withstands temperatures from -100° to +500° F and has silicone adhesive on both sides for superior bonding. 17-FibGX- Premium Fiberglass Tape:Premium Grade Fiberglass Tape is a pressure sensitive tape made of higher-grade woven glass fabric and high temperature silicone adhesive. The glass fabric has excellent abrasion and heat resistance. This product meets Federal Aviation Regulation Part 25.855 (a-1), and Govt. Specification Mil-I-19166C. 17-FibG- Standard Fiberglass Tape:Standard grade fiberglass tape is made of woven glass fabric and high temperature silicone adhesive. This product also meets Govt. Specification Mil-I-19166C. 2975-497-410-Silicone Coated Glass:497 and 2975 are white/410 is blue: silicone rubber-coated glass fabric with a high temperature silicone adhesive. The silicone rubber is tough and abrasion resistant to withstand high temperatures and grit blasting impact. The silicone adhesive provides excellent adhesion at high temperatures yet removes cleanly. *497 and 410 meet Pratt & Whitney Specification of PMC – 4458. Less

CS Hyde’s Metalized Polyester Film tape is 0.9 mil thick with a vibrant, mirror-like finish. It is available in Six Bright Colors: Silver, Black, Gold, Red, Green, Blue. Cut rolls are 1" wide x 72 yards long. Custom widths are our specialty.This tape has an aggressive, More... long lasting acrylic adhesive that maintains excellent solvent resistance and long-term aging properties. Metalized Polyester tape will not discolor over time and is UV resistant. It is flexible and dimensionally stable to 302F. It also features high reflectivity of both light and heat radiation, excellent heat resistance and easy unwind characteristics.Metalized Polyester can be used for splicing in high temperature applications and for a sensing tape for automated equipment used in sorting and counting. It can also be used in photo sensing applications to detect splices to facilitate roll change-over. Test Sampling Recommended.Use for reflective shielding, color coding and identification, plastic coated wallpaper with embossed surfaces, leaders for photo development. Metalized Polyester is also used for decorative trim, graphic and industrial art displays, for toys, appliances, and watercrafts. Can be used as an edging tape for photo preservation, chart presentation and cover art. Less

"FAT" PTFE made with Teflon™ fluoroplastic Tape is a thick gauge skived PTFE tape with pressure sensitive acrylic adhesive.  This PTFE tape is unique in the aspect that it is manufactured at thicknesses well above standard product offerings.  More... This material is available .020" thk. to .125" thk. in roll goods, sheet goods or die cut parts.This PTFE tape is specifically designed for applications where thin PTFE tapes are not enough. FAT PTFE has the heft, density and mass that make it very desirable for applications where thicker materials are a must. FAT PTFE Tape has all the other excellent characteristics associated with standard PTFE tapes: superior insulating strength, slick non-stick surface, high temperature and chemical resistance, and excellent release properties. Less

FEP Optically Clear Teflon™ Tape is manufactured from DuPont™ FEP (fluorinated ethylene propylene) film, backed with high temperature pressure sensitive silicone adhesive rated to (-100°F-400°F).  FEP tapes silicone adhesive backing exhibits More... great chemical resistance, electrical properties, and will remove cleanly with little or to no residue. FEP film itself possesses superior anti-stick, low friction, strength, puncture, chemical & solvent resistance surface properties. FEP film tapes complete composition is weather resistant, stable, and nontoxic making it a versatile performance tape for various applications and industries.FEP Teflon® Tape Applications:Coil & Transformer Insulation- FEP tape is primarily in electrical applications as coil and transformer insulation, cable termination insulation, and capacitor insulation due its high temperature resistance and dielectric strength of (9000 volts per mm).Wire, Cable & Harnesses Wrapping- Due to FEP tape conformability and optical clarity this tape is an ideal choice for wiring applications that require “see through” identification.Barrier Protection Tape- FEP tape can be used as a transparent surface barrier tape for extreme applications. Due to its high temperature, chemical, and weather resistance makes FEP Tape a performance option over common polyester surface protection tapes. Also, due to its optical clarity FEP tape could protect underlying painted substrates or label identification without affecting aesthetics.CS Hyde also supplies FEP Film rolls without adhesive that can be heat sealed, thermoformed, heat bonded, welded, or even combined with other materials as carrier substrates or insulator films.FEP Silicone Adhesive Thickness: *Item # 23-FEP- .002" FEP Film with .0015" Silicone Adhesive*Item # 23-5FEP- .005" FEP Film with .005" Silicone Adhesive*Item # 23-2A-FEP .002" FEP Film with .0023" Acrylic Adhesive Less

Skived High Bond PTFE Tape has all the benefits of thick PTFE (excellent dielectric strength, friction, chemical & water resistance), plus a super-high bond acrylic adhesive. Skived High Bond PTFE Tape is an excellent choice for applications which require adhesion More... to difficult-to-bond, low energy surfaces like some plastics, powder-coats, foams, and oily metals. CS Hyde’s skived high bond tape even sticks to slippery surfaces like PTFE, Acrylic, PE, UHMW, Polyprop, PET, etc.Our High Bond Adhesive is a 3M high-strength, high tack, chemical-resistant acrylic product. The bond strength of this 3M adhesive increases with time and temperature. High humidity has minimal effect on adhesive performance. In general, bond strength is even higher after exposure for 7 days at 90F and 90% relative humidity. Less

Our TFL Copper Extended Life Tape is laminated with PTFE and has a high temp (-100 to +550F) Adhesive. More flexible & longer lasting than traditional coated materials, ideal for extreme environments. This is a low wicking, ultra endurance PTFE tape. This material More... is a grade above our standard red TFL laminate.Custom widths available; e-mail or call Less

PRODUCT DESCRIPTION TFL Extended Life Tape is laminated with PTFE and has a High Temp (-100 to +550F) Adhesive. Super Long-Life; More flexible & longer lasting than traditional coated materials. For extreme environments. Low Wicking; Ultra Endurance PTFE Tape.APPLICATION More... INFORMATION Used primarily in the packing industry as a release surface on heat sealers, blister formation and form-fill equipment where heavy production demands a product with more release surface material.  The durability and anti-stick properties of the TFL-__T also make it an ideal material for lining of guide rails, chutes and slides.  The high temperature capabilities and non-stick properties allow it to perform as an excellent release surface in severe industrial environments, platen covers, dry can covers and the composite aircraft industry. These tapes are used in heating sealing and element covers, lamination release covers, backing release surfaces for impulse wire sealing, L-Bar sealing, shrink wrapping, blister packing, plastic bag manufacturing, dry can roll covers, chute-bed-bin-oven liners, commutator covers, spacers, slot liners, splicing, field and armature winding, cable and conductor wrapping, tool & mold release, flash breaker tape, harness wrap.Custom widths available; e-mail or call Less

CS Hyde’s Zone Tape is a PTFE coated fiberglass tape made with Teflon™ fluoroplastic. This tape has custom sized strips of adhesive on the outer edges, leaving a non-adhesive “free zone” in the center. Custom sizes available. Silicone Adhesive More... (to 500 F) or Acrylic (to 350 F) / Natural Brown Color. Less

CS Hyde Company offers super tough FST Tape, a highly tensilized Skived PTFE tape featuring high temperature (-100 to +500F) silicone adhesive. The tensilized PTFE film has the highest per unit tensile strength of any PTFE product.FST PTFE Tape is used for roll protection More... in high speed, high temperature flat die extrusion of polyethylene coating and laminations. CS Hyde’s tensilized FST PTFE Tape can be used in place of 5480, 426, 2285-2, P422, 6445-02, and 923s. Maroon color. Less

Black, Anti-static PTFE coated fiberglass tape with silicone adhesive is anti-static and semi-conductive, with superior durability and strength to wear, tear, cut through, breaking and flow under heat and pressure.The 20 Series is specially designed for continuous maximum More... operating temperature, up to +500ºF. These conductive tapes are ideal for applications that require static dissipative performance, release properties, temperature, chemical or environmental resistance. PTFE (Teflon®) is one of the most chemically inert materials available and it does not support combustion, has a low coefficient of friction, and there are few substances that will stick to its surface. In addition, this tape can also be used in contact with food.Custom widths, die-cuts, sheets available. Less

Product K5-05 is manufactured from extra strength para-aramid fiber cloth impregnated with a dispersion of anti-static PTFE. This tape has a high temperature, Pressure Sensitive Silicone Adhesive. This anti-static ptfe tape is black in color and provides More... protection from UV damage. Less

Product Description: The R-Series of PTFE (Teflon™) Tapes are super smooth and slippery as a result of a specialized manufacturing process, utlizizing calendared skived PTFE film. These skived PTFE tapes are extremely durable, long-wearing and abrasion resistant.  More... R-Tapes will not curl or wrinkle and R253 does not leave a residue when removed.  These tapes have high temperature resistance (-40F to 500F for Silicone Adhesive and -40F to 350F for Acrylic Adhesive) and superior Dielectric Strength. Performance & Application Information: Ideal for protecting extrusion and laminating equipment during plastic extrusion coating process which combines plastic films with various substrates (most commonly paper).  R-Tapes are used as a roller wrap to protect neoprene rollers from molten plastic.  Super slick R-Tape allows items to move smoothly over its surface.  Excellent release surface. Less

The ThermaCool™ family of high performance thermally conductive PSA tapes provide solutions to difficult thermal management problems. These products can be used in place of mechanical fasteners, provide excellent thermal coupling between components and heat sinks More... and can accommodate materials of different coefficients of thermal expansion with the compliant interface. All of the adhesives are flame retardant and are formulated for high performance adhesion while still being easily re-workable without damage to sensitive components. K275 is manufactured with a 1.0 mil thick thermally conductive KAPTON® film. The film is coated on both sides with 2.0 mils of thermally conductive acrylic pressure sensitive adhesive. K275 is provided in roll form with a release liner on both sides for ease of application. The product was designed to bond electrical components to heat sinks. K275 contains no halides or silicones. K272 is a thermally conductive high dielectric insulator manufactured with a 1.5 mil thick thermally conductive KAPTON® film.The film is coated on both sides with 2.0 mils of thermally conductive silicone rubber. K272 was designed for use in high performance electronics and power supplies where low thermal resistance and high dielectric strength are required. The material can be supplied with a thermally conductive acrylic adhesive on one side for applications requiring self-adhering performance.K271 is manufactured with a 1.0 mil thick thermally conductive KAPTON® film. The film is coated on one side with 1.5 mils of thermally conductive acrylic pressure sensitive adhesive, and on the other side with 2.0 mils of thermally conductive silicone rubber. K271 is provided in roll form with a release liner for ease of application. This product was designed for use in thermally conductive gaskets for high performance electronics where low thermal resistance and high dielectric strength are required. Less