Distributor To Industry, Inc.

Thomas Verified

550 Low Pressure Manual DispenserIntended for low-pressure meter mix applications. this manual dispenser is ideal for dispensing beads or RTM casting. The design is simple: two ball valves are threaded into the back of the manifold and are connected to a common lever More... so that both valves open and close at the same time.600 High Flow (MEGA) Manual DispenserSpecifically designed to be used with the 162A Series disposable 3/4" diameter static mixer. Allows the user to handle both high flow and high viscosity materials easily. The A & B components are separately ported through the valve body and do not combine until they meet inside the static mixer.Features and BenefitsModerately pricedMaterials remain separate until they enter the mixer Less

The Dual SMP System brings Bostik's SMP Technology to the next level by providing speed and security. This is done by adding a small amount of a waterbased B-Component that catalyzes the adhesive bead to cure throughout at the same rate. Cure progression of the More... one-component products, by contrast, is from the "outside-in"The handheld Dual SMP 400P Gun is designed to deliver the adhesive and the B-Component at the proper ratio. It uses a unique static mixer to meter and mix the adhesive and B-Component together that is then dispensed to achieve a bead of adhesive that will cure "through" in hours, not days.Similarly, the two-component Precision Dose Applicator Pump system is designed to handle 5 gallon or 55 gallon containers of adhesive for higher output applications.Guaranteed Cure:In dry and cold conditions above 32ºF and for large beadsAssures the Cure:Even if adhesive is never exposed to air or is encapsulated between two non-porous moisture barrier substratesQuick Green Strength Buildup:Approximately 100 psi after 2 hoursVersatile Technology:Used with any one-part SMP: 70-03A. 70-03A SKF. 70-05A. or 70-08AEasy to Use:Pre-metered, pre-packaged componentsEasy to Scale Up:From 13.5 oz (400 ml) sausage package (Dual) to 52 gallon (197 liter) drums (Precision Dose)Speed Up Production:When large panels are bonded: shorter drive-away time/shorter cycle time/station movesAfter Complete Cure:Still the same great ultimate one-part SMP performanceIf you already use a one-part SMP no need to re-specify Less

The u-TAH Nano is a revolutionary packaging system for mixing and applying 2-component dental and medical materials. This single-use system allows the healthcare professional to accurately and precisely apply mixed material using industry standard "Centrix®" type More... dispensers.Applications include dental bonding and impressions, external chemical bandages, tissue sealants, orthopedic adhesives and compounds, glues for reinforcing sutures and impression materials for hearing aids.Features and BenefitsCompatible with existing "Centrix" type dispensersSuperior ergonomics and mechanical advantageSingle use eliminates risk of cross-contaminationAccurate and consistent 1:1 ratio dispensing and mixingFully DispensedThe unit holds the two mixable components, one behind the other, in a single cylinder. As the dispenser plunger advances into the back of the cartridge, materials and `are forced simultaneously through separate outlets into a disposable in-line mixer. The ratio of the two components is precisely controlled by the cross-sectional area of the back and front chambers, and is varied by adjusting these diameters. The cutaway drawings above depict the 1:1 ratio.u-TAH Nano DispenserUse with cartridges #7703269; (white) or #7704120; (black). Both have a 1.0mL capacity with a 1:1 ratio. Use with mixer #7703940; which has 12+ elements and a 3.2mm diameter.Other mixers are available.Contact EFD for recommendations. Less

The u-TAH Cartridge looks identical to standard caulking cartridges. It is the only cartridge system that maintains accurate ratio control and fits into an existing 1/10th gallon or 310mL caulking gun. This system also fits into pneumatic (rod-driven) and battery-powered More... caulking tools.The patented in-line design stores one component in front of the other but both are extruded through the cartridge outlet and into a static mixer simultaneously. Special non-vented versions are available to handle very low viscosity fluids. The cartridge is offered in a 1:1 ratio with 250mL volume, a 2:1 ratio with 180mL volume and a 10:1 ratio with 280mL volume. The cartridge body is either nylon or polypropylene construction that won’t burst during most demanding applications, providing trouble free applications in the field.Features and BenefitsAccurate ratio controlAfter filling, maintains a superior shelf lifeNo need to purchase special-purpose dispensing gunsHow The EFD u-TAH™ Cartridge System WorksThe cartridge stores the two mixable components, one in front of the other. The rear piston is stationary. As the inner can is pushed forward, the orange fluid is extruded into the center tube, through the cartridge outlet, and into the mixer. At the same time, the movable piston causes the blue fluid to be extruded through the cartridge outlet and into the mixer. The cartridge in the diagram shows a 1:1 ratio, although a 2:1 ratio cartridge is also available. With the 2:1 cartridge, the stationary piston and inner cartridge have a smaller diameter and cross sectional area. Less

EFD produces a variety of side-by-side cartridges, from 50mL to 600mL sizes. A large selection of static mixers in spiral and square configurations are available to provide complete system solutions.Note: All cartridges and pistons shown are polyethylene with the exception More... of AF pistons which are Polyethylene/Polybutylene Terephtalate (PE/PBT). Nylon cartridges and pistons also available. Contact EFD for recommendations. Less